Office Equipment Repairs: 4 Tips for Printer Repair Success

Success in printer repair depends on the knowledge of the type of printer under repair. For example, if you own Dell brand, you should look for a reliable Dell service centre Sydney are has to offer. A technician at a Dell repair centre can be more qualified to deal with that particular brand than one specialized in HP brand.

When you begin your search for a reliable centre for Dell repairs Sydney has to offer, it is important to observe certain factors. First, ensure that the service centre has qualified technicians who specialize in different brands. Secondly, ensure that the technicians use genuine parts during repair. Original parts are durable compared to second-hand components or generic parts, which only fixes the problem for a short time then it resurfaces.

The following are important tips to follow for a successful printer repair. These tips are essential when you decide to fix the problem without involving an expert. This can be a step forward to saving money in repairs, but if the problem proves beyond your capacity to manage, it is always advisable to approach a reliable Dell service centre Sydney has to offer.

Installing new cartridges

To install new cartridges, you should open the cartridge compartment and remove the old ones. Remove the protective film that usually accompanies new cartridges before installation. Check the contacts of the new cartridges to ensure they are not damaged. Put the new cartridges in the appropriate places and close the front cover. Switch on the printer, switch it off, and then on again.

Installing the printer

If your printer fails to stall, go to Control Panel and check the Device Manager. This can reveal Unknown Devices. If your computer indicates the printer as Unknown Device, it means you plugged the cable before you installed the driver software. The solution is to remove the Unknown Device, unplug the cable, and reinstall the printer’s original software. Once done, plug the cable.

Streaks in printer

If your printout images come with streaks, the problem might be a clogged printer head. Open the Control Panel and go to Printers. Select your printer and click properties. From the settings that appear, select Clean Printer Cartridges. This enables the printer to run in a cleaning mode. When the problem persists, you can consult a reliable Dell service centre Sydney has to offer. Try visiting http://printer-repairs.com.au/printer-repairs/dell/ for more information on reliable companies for printer repairs in Sydney.

Print command not working

When your printer fails to respond to the ‘print’ command, check whether the printer is connected to the computer. This might happen where another printer was installed and removed. When you install a new printer, the old printer may still show up as the default printer.

Frequent paper jams

For frequent paper jams, check whether you are loading too much paper. Pieces of debris in the printer and damaged internal gear can also lead to the same problem. When that happens, you can notice one side of the paper being fed faster than the other. In that situation, you can seek the help of an expert.

Share and Enjoy

  • Facebook
  • Twitter
  • Delicious
  • LinkedIn
  • StumbleUpon
  • Add to favorites
  • Email
  • RSS

Leave a Reply

Your email address will not be published. Required fields are marked *